Connect compatible professional audio equipment using this 3-pin XLR male to dual 6.35mm TRS male audio splitter and breakout cable.
The cable features a straight 3-pin XLR male connector at one end and two straight 6.35mm (1/4-inch) TRS male plugs at the other. The two jack connectors have red and silver housings to make each connection easier to identify during installation.
A braided outer jacket helps protect the cable during regular studio, stage and live sound use. Reinforced connector housings and a moulded splitter section provide additional strain relief for frequent setup, transport and connection changes.
Key features:
• Straight 3-pin XLR male connector
• Dual straight 6.35mm TRS male plugs
• Red and silver identification housings
• Passive audio splitter and breakout design
• Durable braided outer jacket
• Reinforced splitter section and strain relief
• Suitable for compatible studio, stage and professional audio equipment
• Available in 0.5m, 1.8m and 3m lengths
Typical applications:
• Mixing desks and audio interfaces
• Recording studio equipment
• Stage and live sound systems
• Amplifiers and audio processors
• Professional monitoring equipment
• Broadcast and signal-routing applications
Important compatibility information:
A standard 3-pin XLR connection normally carries one balanced mono signal rather than separate left and right stereo channels.
Although both 6.35mm connectors are TRS plugs, TRS can carry balanced mono or stereo depending on the connected equipment. This cable should not automatically be described as producing two independent stereo outputs.
The exact function of each 6.35mm plug depends on the internal wiring. Please confirm the required pinout and compatibility of your equipment before ordering.
This is a passive cable. It does not amplify, mix, isolate or independently control the two connections.
