Connect a compatible 3-pin XLR male audio output to two 6.35mm TS mono connections with this XLR female to dual 6.35mm male audio splitter cable.
The cable features a straight 3-pin XLR female connector on one end and two straight 6.35mm TS mono male plugs on the other. One jack plug has a red identification sleeve, making it easier to distinguish the two connections during installation.
Its braided outer jacket and reinforced connector housings provide added protection for recording, live sound, studio and professional audio applications.
Key features:
• Straight 3-pin XLR female connector
• Dual 6.35mm TS mono male plugs
• Passive one-to-two audio splitter design
• One 6.35mm plug marked with a red identification sleeve
• Braided cable jacket
• Reinforced moulded connectors and strain relief
• Suitable for compatible mixers, amplifiers and audio equipment
• Available in 0.5m, 1.8m and 3m lengths
Typical applications:
• Mixing desks and audio interfaces
• Wireless microphone receivers
• Stage amplifiers and powered speakers
• Recording studio equipment
• Public-address and live sound systems
• Audio testing and signal-routing setups
Important compatibility information:
A standard 3-pin XLR connector normally carries one balanced mono signal rather than separate left and right stereo channels.
The exact function of the two 6.35mm TS plugs depends on the cable’s internal wiring. They may duplicate one mono signal or connect separately to different conductors of the balanced XLR connection.
Please confirm the wiring arrangement and equipment requirements before ordering. Incorrect use may result in reduced volume, phase cancellation, noise or no audio.
This passive cable does not amplify, mix, isolate or independently control the two connections.
