Connect compatible professional audio equipment with this right-angle 3-pin XLR male to dual 6.35mm TS mono male audio splitter and breakout cable.
The cable features a space-saving 90-degree 3-pin XLR male connector at one end and two straight 6.35mm (1/4-inch) TS mono male plugs at the other. The angled XLR connector is ideal for equipment installed close to a wall, inside a rack or in other restricted spaces where a straight connector may place additional strain on the cable.
The two 6.35mm plugs use red and silver identification housings, making each connection easier to distinguish during setup. A braided outer jacket and reinforced splitter section provide additional durability for studio, stage and live sound applications.
Key features:
• Right-angle 3-pin XLR male connector
• Dual straight 6.35mm TS mono male plugs
• Red and silver identification housings
• Space-saving 90-degree XLR design
• Passive audio splitter and breakout cable
• Durable braided outer jacket
• Reinforced splitter section and strain relief
• Suitable for compatible mixers, amplifiers and professional audio equipment
• Available in 0.5m, 1.8m and 3m lengths
Typical applications:
• Mixing desks and audio interfaces
• Recording studio equipment
• Stage and live sound systems
• Amplifiers and audio processors
• Wireless microphone equipment
• Professional monitoring and signal-routing applications
Important compatibility information:
A standard 3-pin XLR connection normally carries one balanced mono audio signal rather than separate left and right stereo channels.
The two 6.35mm connectors are TS mono plugs. Their exact function depends on the internal wiring of the cable. They may duplicate one mono signal or connect separately to different conductors of the XLR connection.
Please confirm the required wiring and equipment compatibility before ordering. Incorrect use may result in reduced volume, phase cancellation, noise or no audio.
This is a passive cable. It does not amplify, mix, isolate or independently control the two connections.