Split a compatible 3-pin XLR connection into two separate 6.35mm female audio sockets with this XLR Male to Dual 6.35mm Female Audio Splitter Cable.
The cable features one straight 3-pin XLR male connector and two colour-coded 6.35mm female sockets. The red and black sockets make it easier to identify the two separate output channels when connecting mixers, audio interfaces, amplifiers, signal processors and other compatible professional audio equipment.
Its durable braided outer jacket helps protect the internal conductors from everyday wear, while reinforced connector housings and moulded strain relief provide additional protection against pulling and repeated bending. Gold-coloured socket contacts help provide a secure and reliable connection with compatible 6.35mm plugs.
Key Features:
• One 3-pin XLR male connector
• Two 6.35mm female audio sockets
• Red and black sockets for easy channel identification
• Suitable for splitting compatible two-channel audio signals
• Gold-coloured 6.35mm socket contacts
• Braided outer jacket for improved durability
• Reinforced connector housings
• Passive plug-and-play design
• No software, driver or external power required
• Available in 0.5m, 1.8m and 3m lengths
Suitable Applications:
• Mixers and mixing consoles
• Audio interfaces
• Signal processors
• Amplifiers and powered speakers
• Stage-monitoring equipment
• Recording-studio systems
• Live sound and PA installations
• KTV and entertainment audio systems
• Broadcast and conference equipment
Compatibility Information:
A standard 3-pin XLR connection cannot provide two independent balanced outputs. This type of cable is normally wired to separate two unbalanced audio channels using a shared ground connection.
The two 6.35mm sockets may physically accept compatible TS or TRS plugs, but the signal available at each socket depends on the cable’s internal wiring and the connected equipment. In most two-channel splitter applications, each socket carries one separate mono channel rather than a complete stereo signal.
This cable is not a headphone amplifier and may not be suitable for connecting two pairs of stereo headphones. It does not amplify, electronically balance, mix or convert the audio signal.
Please confirm the XLR pin assignment and equipment wiring before purchase, as XLR pin configurations can vary between devices.
